Galvanizing furnace with kettle
Galvanizing furnaces with kettle are used for galvanizing of structural steel components of large dimension. They are available with natural gas, oil or electrical heating. The dimension can be adapted to the intended goods to be galvanized.
Galvanizing furnace heat the galvanizing kettle, which contains zinc where the goods to be coated are dipped in. The dimension of the kettle is specified acc. to the goods. Depth, width and length can be adjusted accordingly.
Heating can be effected by natural gas burners of the high speed or the flat flame design or by oil burners. Also electrical heating is available.
Kettle dimension of more than 20 m in length, width of more than 3 m and depths of more than 4 m are possible and installed.
Galvanizing of Single Parts
Drying furnaceDrying furnaces are used for drying the goods before they enter the galvanizing bath. The drying process finishes the pre-treatment, which took place in liquid media and ended up with dipping the parts into flux.
Galvanizing furnace for high temperatureGalvanizing furnaces with ceramic bath area are used for galvanizing of small parts. They are available with natural gas and oil heating. The dimension can be adapted to the intended goods to be galvanized.
Hard zinc grabMost important tool for maintaining the galvanizing kettle is the hard zinc grab.
Zinc bath housingThe zinc bath housing collects all the fumes arising during dropping the goods into the liquid zinc.